15 Years Manufacturer Aluminum bottles AB-750 Nigeria Factories

Short Description:

Product Detail

Product Tags

Related Video

Feedback (2)

[rand_pre] [rand_keywords], [rand_keywords], [rand_keywords], [rand_suffix]
15 Years Manufacturer Aluminum bottles AB-750 Nigeria Factories Detail:

Product detail pictures:

15 Years Manufacturer
 Aluminum bottles AB-750 Nigeria Factories detail pictures

Related Product Guide:

[rand_pre] 15 Years Manufacturer Aluminum bottles AB-750 Nigeria Factories, The product will supply to all over the world, such as: [rand_country], [rand_country], [rand_country], [rand_l_suffix]

  • http://www.ecpnp.com/Plane-and-Rolling-Transfer-Machines-234.htm

    HT2040 Pneuamtic flat/cylindrical bottle heat transfer printing mchine with multi-function
    Heat tranfer printing machine is automatic rubber heat transfer machine which cost performance is the highest in current marketing. Which meet all requested from the customer and can adjust the Speed, Radian, Timing, Fixed position. Having a pefect effect for processing , such as it is very levelly, brightly and cleanly, without garland and coarse grain etc. With automatic feeding foil.

    1.The machine has two functions as heat transfer and hot stamping.
    2.Can print various of products, such as flat, round and arch etc.
    3.Having automatic feeding and out function, automatic stamping, photoelectric sensor of automatic feeding foil etc to achieve semi automatic.
    4.Special constant temperature heating, saving electric power and precise temperature.
    5.Using Mirco computer to control and east to operate.
    6.Can adjust speed, arch and have perfect printing effect.
    7.All parts of this machine is process carefully, all key parts with hard chromium plating, surface is smoothy and nice.

    Shere of application:
    This machine can suitable to print Plastics, VCD panel, PVC Products, Timber, Calendary, Book, Lens etc which are flat or curve surface to heat transfer. Such as: DVD/VCD Face, Remote Controller Panel, Switch cover, Recreational Machines’ Panel, Mini Digit Shell, Lens etc.

    Maximum stamping area: 400×230MM
    Maximum stamping diameter: 150mm
    Roller size: 200×10mm
    Hot stamping paper winding length: 25mm
    The fastest speed: 900pcs/hr
    Power: 110v-240v/ 60HZ-50HZ

    Company:EC Printing Machine Factory Limited
    Website 1: www.printer-manufacture.com
    Website 2: www.ecpnp.com
    Email 1: sales@printer-manufacture.com
    Email 2: sales@ecpnp.com

    Air Tank Material Selection
    There are two general modes of failure in mechanical components: “brittle” or “ductile” fracture.

    “Ductile” fracture occurs when the material stretches (yields) like taffy before breaking apart.

    “Brittle” fracture occurs when a crack propagates through the material “ripping” the component into pieces before much stretching occurs.

    Materials will yield (stretch) unless they have the necessary conditions to crack. The “Fracture Toughness” of a material as well as the size, shape and location of any cracks or other stress concentrators determine if a material will crack under a given loading condition. What makes this difficult is knowing the information about the cracks in the material, an impossible task without expensive equipment like x-ray units and the fact that cracks may grow over the service life of the component due to cyclic stresses or creep.

    Pressure vessels can contain huge amounts of energy in the from of compressed gas. If a tank were to break due to brittle fracture shock-waves through the material may cause the tank to explode into hundreds of pieces which would travel at incredible speed causing damage to the equipment or personnel in the area.

    There are two methods used for making safe pressure vessels: Yield Before Break, and Leak Before Break.

    The yield before break design method ensures that the pressure tank will yield (stretch) before breaking apart. This means you must insure that there is no yielding by measuring or observing the tank. For example, when a 2-liter bottle is over-pressurized it is easily apparent as the bottle expands significantly (before it explodes due to brittle fracture).

    The leak before break design method ensures that even a crack as large as the thickness of the wall of the pressure vessel will still not allow the material to fracture. This means the pressure vessel will leak before the tank breaks due to brittle fracture, lowering the internal pressure and avoiding further propagation of the crack.

    So far, the PVC pipe survived all but the 12 foot freezer temp drop. What does this mean? Hard to say anything conclusively, but the pipe is stronger than I expected – but looks to get dramatically less safe at lower temperatures. More testing is required!

    5 Stars By [rand_feedback_name] from [rand_country] - [rand_feedback_time]
    5 Stars By [rand_feedback_name] from [rand_country] - [rand_feedback_time]